When users purchase the Ultrafine Mill, they are determined according to their actual needs, especially the properties of the materials to be processed, such as the hardness and humidity of the materials. The humidity of the materials is one of the important factors affecting the output of the mill. If the material humidity is too high, then we must do some processing before entering the mill. Today we want to share with you the influence of the moisture of the material on the mill. For the mill, the feed moisture has certain requirements. For example, the hardness of the ore needs to be below 7 and the humidity should not exceed 6%. If the humidity is too high, consider drying it and then grinding it. Generally, the moisture content is within 6%. If it exceeds this standard, the grinding material will enter the machine and adhere to the machine, which will reduce the production efficiency of the equipment, and will also block the circulation air duct, the discharge port of the analyzer, etc. Causes a decrease in production and, in severe cases, damage to the equipment.
In addition, the moisture content also affects the grinding performance of the mill. In the grinding process of materials, if the water content is too high, it will easily adhere to the machine during the grinding process, which will cause a certain burden on the machine, which will easily cause different degrees of damage to the machine; if the moisture is too high When entering the grinding machine, the heat generated by the grinding will cause the gas in the grinding chamber to evaporate and change the air flow, so that the circulating airflow increases, resulting in less powder or even explosion of the milling machine.
Excessive humidity of the material will only cause a series of negative effects on the production and use of the mill. Therefore, when selecting materials, the majority of users must first check the humidity of the material and meet the requirements before entering the mill. Users need to choose the mill manufacturer, advanced manufacturing technology and superior high wear-resistant high-quality materials to create an industrial mill to withstand the ore and time baptism in order to have a longer service life.